Filter
Top Products
3.3.1 Connecting the personal computer to the programmable controller
3 - 23
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
3.3 Writing a Project to the programmable controller
6. Click the button to execute
a communication test with the programmable
controller through the specified connection
channel.
7. When communication with the programmable
controller is finished normally, the left screen
appears, and the "PLC Type" field screen the
programmable controller CPU model name.
Click the button to close the screen.
If communication with the programmable controller
has failed, the screen below appears.
Check the connection destination, connection cable,
etc.
8. Click the button to finish "Transfer
Setup" and close the screen.
Click it.