Filter
Top Products
5 - 12
5.4.1 Monitoring a program
5 CREATING TWO OR MORE PROGRAM BLOCKS
GX Works2
5.3 Writing a Project to the programmable controller
Refer to the following section for the procedure to write a project to the programmable controller CPU.
3.3 Writing a Project to the programmable controller
5.4 Monitoring Operations
Execute monitoring, and check the operations.
Note that some screen shot colors have been changed for printing convenience.
GX Works2 is able to simulate programmable controller operations in offline mode.
Refer to the following manual for the simulation function:
GX Works2 Version 1 Operating Manual (Common)
5.4.1 Monitoring a program
1. Click "Project" in the view selection area on the
Navigation window to display the Project view.
2. Double-click "POU" "Program" "pouring"
"Program" on the Project view to display the
pouring [PRG] Program [Structured Ladder/
FBD] screen.
Display the refilling [PRG] program [Structured
Ladder/FBD] screen and the indicating [PRG]
program [Structured Ladder/FBD] screen in the
same way.
Click it.
Double-click it.
(To the next page)