Mitsubishi Electronics SW1DNC-GXW2-E Water System User Manual


  Open as PDF
of 110
 
3 - 48
3.7.5 Printing a PLC Parameter
3 CREATING PROGRAM IN STRUCTURED LADDER/FBD LANGUAGE
GX Works2
3.9 Exiting GX Works2
End the project.
1. Select [Project] [Exit (Q)].
2. Click the button to exit GX Works2.
If you have not saved the project, the following message appears.
Click the button to save the project.
Click the button to exit GX Works2 without saving the project.
 previous next