Filter
Top Products
2 - 2
2 CREATED PROGRAM AND SYSTEM CONFIGURATION
GX Works2
2.1 System Configuration
This manual uses GX Works2 and the Q Series programmable controller for explanation.
2.2 Overview of Program Creation
This manual explains the following program creation procedures using the simple example program shown in
the table below.
• Creating a new project
• Setting parameters
• Setting labels
• Creating a program (inputting contacts and application instructions, converting ladder blocks and compiling
the program)
• Writing to the programmable controller
• Monitoring ladder, etc.
• Preview, Printing
Table 2.1 Overview of created program
Program
language
Number of
program
blocks
Operation overview Reference
Structured
Ladder
1 Chapter 3
3 Chapter 5
Programmable controller (QCPU)
USB cable
GX Works2