Filter
Top Products
1 - 1
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
1OVERVIEW
This manual explains the procedures to actually create a program (Structured Project) using GX Works2 and
operate the programmable controller using the created program.
If this is your first time creating a Structured Project using GX Works2, you are recommended to read this
manual first, and then use GX Works2.
Refer to the following manual for Simple Projects:
GX Works2 Beginner’s Manual (Simple Project)
1.1 Simple Project and Structured Project . . . . . . . . . . . . . . . . . . . 1-2
1.2 Program Creation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4