Filter
Top Products
3 - 24
3.3.1 Connecting the personal computer to the programmable controller
3 CREATING PROGRAM IN STRUCTURED LADDER/FBD LANGUAGE
GX Works2
● You can set two or more connection destinations and change them over if there are two or more
connection destinations.
1. Select "Connection1" in the Current
Connection on the Connection
Destination view, right-click it, and then
select the menu item "Add New Data".
The Add New Data screen will appear.
2. Set "Data Name", and uncheck "Set as
Default Connection".
Click the button to display the
newly created connection destination in
"All Connections" on the Connection
Destination view.
Settings
• Data Name : Connection2
• Set as Default Connection: Unchecked
3. Set the connection destination.
Double-click "Connection2" in "All
Connections" to display the Transfer
Setup screen.
3.3.1 Step3 in the Setting the
Transfer Setup
Newly created connection destination