Mitsubishi Electronics SW1DNC-GXW2-E Water System User Manual


 
3.7.1 Setting the printer
3 - 41
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
3.7 Printing
3.7 Printing
You can print programs and parameters created using GX Works2 in a printer.
The print function consists of Batch print and print. This section explains print.
For details of printing, refer to the following manual.
GX Works2 Version 1 Operating Manual (Common)
3.7.1 Setting the printer
The printer which prints is set up.
1. Select [Project] [Printer Setup] to display the
Printer Setup screen.
2. Select the Printer, Paper size, Orientation, etc.
After the setting, click the button to close
the Printer Setup screen.