Filter
Top Products
5.2.5 Preparing (creating) the program configuration
5 - 5
1
OVERVIEW
2
CREATED PROGRAM
AND SYSTEM
CONFIGURATION
3
CREATING PROGRAM IN
STRUCTURED LADDER/
FBD LANGUAGE
4
CREATING
PROGRAM IN ST
LANGUAGE
5
CREATING TWO OR
MORE PROGRAM
BLOCKS
5.2 Creating a Project
5.2.5 Preparing (creating) the program configuration
Create a POU (three program blocks) for Structured Ladder/FBD program, and register the three
program blocks created in the POU to a task.
When you create a new project, GX Works2 automatically creates the Program File, Task and POU
shown in the table below.
Table 5.1 Name of Program File, Task and POU created automatically
Item Name
Program Setting
(No Execution Type)
MAIN
Task
Task_01
The program block "POU_01" is registered in "Task_01".
POU POU_01
1. Select "POU" "Program" "POU_01" on the
Project view, right-click "POU_01", and then
select the menu item "Delete".
2. Click the button to delete the selected
data.
(To the next page)