Filter
Top Products
TrigOut
Delay
Tracking Menu
Function Group
Menu Map
Description
Programming Codes
See Also
POWER, USER CAL
5,
9
In the menu structure there are two occurrences of this softkey. One
occurs in the POWER
(K],
the other occurs in the USER CAL
(MENU). Both softkeys operate the same way. These softkeys access
the tracking menu.
Auto Track
Realigns the synthesizer’s output filter and
oscillator to maximize output power for the
swept frequency mode.
Peak RF Always
Peak RF Once
Periodically realigns the synthesizer’s output
filter and oscillator to maximize output power
for the CW frequency mode.
Realigns the synthesizer’s output filter and
oscillator to maximize output power for the
CW frequency mode.
SCPI: NONE
Analyzer:
,NONE
Softkeys listed above.
“Using the Tracking Feature,” in Chapter 1.
TrigOut
Delay
Function Group
SWEEP
Menu Map
7
Description
This
softkey
lets you specify the amount of time after phase-lock
before a trigger pulse is sent out of the TRIGGER OUTPUT BNC.
The delay can be set from 0 to 3.2 seconds. An asterisk next to the
key label indicates this feature is active.
HP 8360
User’s Handbook
Operating and Programming Reference
T-3