Filter
Top Products
FREQUENCY
(MENU)
Freq Offset
List Menu
Sets the frequency offset value and applies
it to all frequency parameters.
Displays the frequency list create/edit
softkeys.
Step Swp Menu
Reveals the stepped frequency sweep edit
soft keys.
Up/Down
Size CW
Sets the frequency step size in the CW
frequency mode.
Up/Down Size Swept
Sets the frequency step size in the swept
frequency mode.
zoom
Places the synthesizer in the
CF/AF
sweep
mode, where the rotary knob and numeric
entry keys control CF, and the up/down
arrow keys control AF.
See Also
Softkeys listed above.
“Optimizing Synthesizer Performance” in Chapter 1.
Freq
Mult
Function Group
FREQUENCY
Menu Map
2
Description
This
softkey
lets you set a frequency multiplier value and applies it to
all frequency parameters. Any integer value between and including
f36
is accepted. Changing the multiplier value changes the display,
it does not affect the output of the synthesizer.
For example:
1. Set the start frequency to 4 GHz.
2. Set the stop frequency to 10 GHz.
3. Set the frequency multiplier to 5.
Note that the display indicates
start=20
GHz,
stop=50
GHz and
asterisks appear next to the frequency data.
4. Now set the stop frequency to 30 GHz. The synthesizer frequency
is 6 GHz, or 30 GHz
+
5.
Frequency multiplier and offset are related as shown by the following
equation:
Entered value or Displayed Frequency
=
(Frequency
Generated x Multiplier) + Offset value
F-18
Operating
ahd
Programming Reference
HP 8360
User’s Handbook