Filter
Top Products
Security Menu
Function Group
SYSTEM
Menu Map
8
Description
This
softkey
accesses the security function softkeys.
Blanlr
Display
Turns off the synthesizer’s data display, active
entry, and message line areas.
Clear Memory
Writes alternating ones and zeros over all
synthesizer state functions and save/recall registers
a selectable number of times, then returns the
synthesizer to the factory-preset state of operation.
Save Lock
Zero Freq
Disables the save function.
Displays zeros for all accessible frequency
information.
The features listed above together with the
softkeys Freq Offset
and Freq Mult provide the synthesizer with security controls
for a variety of situations. The local lockout (LLO) programming
command adds security when the synthesizer is used in an ATE
environment. A security calibration constant that can be accessed
through the service adjustment menu (requires a password for access)
is available also. Refer to the
Service Guide for information on
calibration constants.
See Also
Softkeys listed above.
“Using the Security Features,” in Chapter 1.
S-56
Operating and Programming Reference
HP 8360
User’s Handbook