Filter
Top Products
Clear
Nemorg
Clear Memory
Function Group
SYSTEM
Menu Map
8
Description
This
softkey
causes the synthesizer to return to the factory preset
instrument state, after writing alternating ones and zeroes over all
state information, frequency lists, and save/recall registers a selected
number of times. When you select Clear Memory , the synthesizer
displays the following in the active entry area:
-->
# OF TIMES TO CLEAR MEMORY: X
Enter the number of times the state information should be
overwritten. While the synthesizer is working to overwrite the state
information, it flashes the count on the display.
This
softkey
causes the synthesizer to recall the original calibration
data stored in permanent memory (EEROM) all list and user ALC
correction data will be lost.
Programming Codes
SCPI:
SYSTem:SECurity:COUNt <n>
SYSTem:SECurity[:STATe] ON
SYSTem:SECurity[:STATe] OFF
The transition from on to off triggers the blanking. Sending the “off’
message by itself will do nothing.
Analyzer:
SHMZ18HZ
SHKZOHZ
See Also
Security Menu
“Using the Security Features” in Chapter 1.
HP 8360
User’s Handbook
Operating and Programming Reference
C-3