Filter
Top Products
POWER
(iZiG)
Function Group
POWER
Menu Map
5
Description
This
hardkey
accesses the power function softkeys.
F’ltness
Menu
Accesses the
softkeys in the flatness
correction menu.
Power Offset
Changes the displayed power to include
an offset, but does not change the
output power of the synthesizer.
Power Slope
Activates the linear, power-per-frequency
mode of power output, and makes RF
slope (dB/GHz) the active function.
Power Sweep
Activates power sweep mode and makes
power sweep
(dB/swp)
the active
function.
Set
Atten
Activates uncoupled attenuator as
the mode of operation and makes the
attenuator value the active function.
Tracking Menu
Accesses the softkeys in the tracking
calibration menu.
Uncoupl
Atten
Uncouples the attenuator from the ALC
system.
Up/Dn
Power
Allows you to enter values for the power
level step size.
All RF power functions except for power level, flatness on/off, and
RF on/off are contained in the power menu.
Programming Codes
SCPI: NONE
Analyzer: NONE
See Also
Softkeys listed above,
@,
[FLTNESS
ON/OFF], (POWER LEVEL), and
(@Fifqq.
“Getting Started Basic” and “Getting Started Advanced,” in
Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
HP 8360
User’s Handbook
Operating and Programming Reference
P-5