Filter
Top Products
Auto Fill
Stop
Auto Fill Start
Function Group
FREQUENCY, POWER
Menu Map
2,s
Description
This
softkey
is used in two locations: Fltness Menu and
List Menu. The operation is the same in both applications.
This
softkey
enables the entry of a start frequency used to determine
the beginning frequency of the automatic filling array. The array
is not created until either the increment value or the number of
points is assigned. The auto fill start frequency does not affect the
synthesizer start frequency. When Auto Fill Start is selected, the
active entry area indicates:
-->
Fill Start: XXXXXXXXX MHz
where X represents a numeric value. Unless a previous entry was
made, the display indicates the synthesizer minimum frequency.
Programming Codes
SCPI: NONE, see Fltness Menu or List Menu
Analyzer: NONE
See Also
Fltness Menu, List Menu
“Optimizing Synthesizer Performance” in Chapter 1.
Auto Fill Stop
Function Group
FREQUENCY, POWER
Menu Map
2,s
Description
This
softkey
is used in two locations: Fltness Menu and
List Menu. The operation is the same in both applications.
This
softkey
enables the entry of a stop frequency used to determine
the ending frequency of the automatic filling array. The array is not
created until either the increment value or the number of points is
assigned. The auto fill stop frequency does not affect the synthesizer
stop frequency. When Auto Fill Stop is selected, the active entry
area indicates:
-->
Fill Stop: XXXXXXXXX MHz
HP 8360
User’s Handbook
Operating and Programming Reference
A-25