Filter
Top Products
Function Group
MENU SELECT
Menu Map
3
Description
This
hardkey
allows access to the marker functions.
Amp1
Markers
Causes the synthesizer to display markers as an
amplitude pulse.
Center=Marker
Delta Marker
Delta Mkr Ref
Changes the synthesizer’s center frequency to
the value of the most recently activated marker.
Display the frequency difference between the
active marker and the marker designated by the
softkey
Delta Mkr Aef .
Reveals the softkeys in the delta marker
reference menu.
Ml--M2
Sweep
Marker Ml
Marker
M2
Marker
M3
Marker
M4
Marker
M5
Markers
A11
Off
Start=Ml
Stop=M2
Causes the synthesizer to sweep from Ml to M2.
Makes Ml frequency the active function.
Makes
M2
frequency the active function.
Makes
M3
frequency the active function.
Makes
M4
frequency the active function.
Makes
M5
frequency the active function.
Turns off all markers.
Changes the synthesizer start and stop
frequencies to the values of Ml and
M2.
The markers are functional whenever an asterisk appears next to the
key label, but only one marker can be active at a time. The active
marker is indicated in the active entry area.
See Also
Softkeys listed above.
“Marker Operation,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
HP 8360
User’s Handbook
Operating and Programming Reference
M-3