Filter
Top Products
Peak RF Once
Function Group
POWER, USER CAL
Menu Map
5,9
Description
This
softkey
appears in two locations: the POWER Tracking Menu
and the USER CAL Tracking
!lenu
. The operation is the same in
both locations.
This
softkey causes an instantaneous, one-time execution of the
peaking function when the synthesizer is in the CW or manual sweep
mode. It aligns the output filter (SYTM) so that its
passband
is
centered on the RF output.
Programming Codes
SCPI:
CALibration:PEAKing[:EXECute]
Analyzer: SHAK
See Also
Auto Tracking,
Peak RF Always, Tracking Menu
“Optimizing Synthesizer Performance,” in Chapter 1.
[POWER
LEVELI
Function Group
POWER
Menu Map
NONE
Description
This
hardkey
lets you control the output power level of the
synthesizer. The synthesizer has different power leveling modes and
leveling points, and as such, the (POWER
LEVEL_)
key controls different
aspects of the power level (ALC) system.
The following is an explanation of power level operation in the
different ALC system configurations.
In
Normal, Internal, the [POWER LEVEL) key controls the output
power level of the synthesizer directly. The attenuator (if present)
is controlled together with the complete range of the ALC system
(+25
to -20
dBm).
When you press [
POWER LEVEL
), the active entry area displays:
-->
POWER LEVEL :
X . XX
dBm,
where X represents a numeric value. The data display area indicates:
P-2
Operating and Programming Reference
HP 8360
User’s Handbook