Filter
Top Products
Center=Narker
Function Group
MARKER
Menu Map
3
Description
This
softkey
sets the center frequency of the sweep to the frequency
of the most recently activated marker. Select any marker Ml . . .
M5,
then select
Center=Marker
to change the center frequency of
the sweep to that of the marker. The frequency span does not change
unless the new sweep limits fall outside the frequency range of the
synthesizer, in that case the synthesizer automatically scales the
frequency span to be within the synthesizer’s operating frequency
range.
Programming Codes
SCPI:
MARKer[n][:FREQuency]
?
FREQuency:CENTer
<freq
from above> [freq suffix]
Analyzer: MC
See Also
[w)
“Marker Operation” in Chapter 1.
Clear Fault
Function Group
Menu Map
Description
Programming Codes
See Also
SERVICE
6
This
softkey
clears all the latched fault status indicators.
SCPI: DIAGnostics:OUTPut:FAULts
The above command relays the fault information and clears all faults.
Analyzer: NONE
Fault Menu
C-2
Operating and Programming Reference
HP 8360
User’s Handbook