Filter
Top Products
l
STATus:QUEStionable[:EVENt]?
Queries the Data Questionable Event Register. This is a destructive
read.
l
STATus:QUEStionable:NTRansition
<num>
l
STATus:QUJZStionable:NTRansition?
Sets and queries the Negative
TRansition
Filter for the Data
Questionable Status Register. The
STAT
US
:
PRESet
value is 0.
l
STATus:QUEStionable:PTRansition
<num>
l
STATus:QUEStionable:PTRansition?
Sets and queries the Positive
TRansition
Filter for the Data
Questionable Status Register. After STAT
US
:
PRESet,
all used bits are
set to
1s.
Sweep Subsystem
Interactions between dwell, sweep time, points, step size, and
frequency span are as follows:
SWEep:TIME = (5 ms + SWEep:DWELl) x (SWEep:POINts
-
1)
FREQ:SPAN = SWEep:STEP x (SWEep:POINts
-
1)
HP 8360
User’s Handbook
DWELl
OFF
OFF
ON
SWEep:xx:AUTO switches
TIME
Switch Action
OFF
No coupling between SWEep:DWELl,
SWEep:TIME and SWEep:POINts.
ON
No coupling between SWEep:DWELl,
SWEep:TIME and SWEep:POINts.
OFF
When SWEEP:TIME or SWEEP:POINts
are changed, SWEep:DWELl
=
(SWEep:TIME
/
(SWEep:POINts
-
1))
-
5 mS.
SWEep:DWELl is limited to 100
ps,
minimum.
ON
ON
SWEep:DWELl
= 100
ps
(MINimum).
SWEep:TIME
=
5.1
ms
x (SWEep:POINts
-
1)
l
SWEep:CONTrol:STATe
ONlOFFlllO
l
SWEep:CONTrol:STATe?
Sets and queries the state of the sweep control.
OFF
Normal source mode.
ON
Use master slave source mode.
*RST value is OFF.
l
SWEep:CONTrol:TYPE
MASTerlSLAVe
l
SWEep:CONTrol:TYPE?
Sets and queries the synthesizer, whether it is in master or slave
mode. This applies in a dual
source mode.
*RST
value is
MASTer.
Operating and Programming Reference
S-49