Filter
Top Products
Auto Fill
Incr
Auto Fill
Incr
Function Group
FREQUENCY, POWER
Menu Map
2,s
Description
This softkey is used in two locations:
Fitness
Menu and
List Menu.
Flatness Menu
-
When selected, the synthesizer waits for a frequency
increment value to be entered.
-->
Increment:
is displayed in
the active entry area. A list of frequencies is created automatically,
beginning at the auto fill start frequency and always ending with the
auto fill stop frequency. The synthesizer uses the increment value on
all points, but if the stop frequency requires a different increment to
be used to be exact, the synthesizer simply ends the frequency list at
the stop frequency disregarding the increment value.
If the increment value requested creates a list that exceeds the
number of elements available, the following message appears:
TOO MANY CORRECTION PTS REQUESTED
List Menu
-
When selected, the synthesizer waits for a frequency
increment value to be entered.
--)
Increment: is displayed in
the active entry area. A list of frequencies is created automatically,
with all points separated by the frequency increment value. The list
begins at the auto fill start frequency and ends at a frequency less
than or equal to the auto fill stop frequency.
If the increment value requested creates a list that exceeds the
number of points available
(801), the following message appears:
TOO MANY LIST PTS REQUESTED
Programming Codes
SCPI:NONE,see
Fltness Menu or List Menu
Analyzer: NONE
See Also
Fltness Menu, List Menu
“Optimizing Synthesizer Performance” in Chapter 1.
HP 8360
User’s Handbook
Operating and Programming Reference
A-23