Filter
Top Products
6-30 Operation MN1928
4. On the main menu, choose File, Save File. Locate a folder , enter a filename and click Save.
6.10.1 Loading saved information
1. In the Toolbox, click the Edit & Debug icon.
2. On the main menu, choose File, Open File...
Locate the file and click Open.
A Startup block should be included in every Mint program, so that whenever a program is
loaded and run the NextMove ES will be correctly configured. Remember that every
drive/motor combination has a different response. If the same program is used on a
different NextMove ES installation, the Startup block will need to be changed.