Baldor MN1928 Home Security System User Manual


 
5-12 Input / Output MN1928
5.3.1 Analog inputs
Location X8
Mating connector: Weidmüller Omnimate BL 3.5/10
Pin Name Description NextMove ES
96-pin
connector
10 REL COM Common relay contact
9 REL NO Normally open relay contact
8 REL NC Normally closed relay contact
7 REL COM Common relay contact
6 Shield Shield connection a32
5 AIN1- A nalog input AIN1- a27
4 AIN1+ Analog input AIN1+ c28
3 AGND Analog ground a30
2 AIN0- A nalog input AIN0- a28
1 AIN0+ Analog input AIN0+ b28
The analog inputs on the backplane are connected directly to the NextMove ES and do not
pass through any circuitry on the opto-isolator card. See section 4.3.1 for electrical
specifications of the analog inputs.
NextMove ES
-
+AIN0+
AIN0-
AGND
MintMT
ADC.0
Backplane
2
3
1
96
pin
connector
-
+
‘X8’
120k
120k
15k
10k 10k
22nF
10nF
Figure 17 - Analog input, AIN0 shown
1
10