Baldor MN1928 Home Security System User Manual


 
6-28 Operation MN1928
4. Now drag the IN1 icon ont o the Fwd Limit icon .
This will setup IN1 as the Forward Limit input of axis 0.
5. Click Apply to send the changes to the NextMove ES.
Note: If required, multiple inputs can be configured before clicking Apply.
6.9.2 Digital output configuration
The Digital Outputs tab allows you to define how each digital output will operate and if it is to
be configured as a drive enable output (see section 6.3.2). Remember to click Apply to send
the changes to the NextMove ES.