Baldor MN1928 Home Security System User Manual


 
Operation 6-29MN1928
6.10 Saving setup information
When power is removed from the NextMove ES all data, including configuration and tuning
parameters, is lost. You should therefore save this information in a file, which can be loaded
when the card is next used.
1. In the Toolbox, click the Edit & Debug icon.
2. On the main menu, choose File, New File.
A new program editing window will appear.
3. On the main menu, choose Tools,
Upload Configuration Parameters.
WorkBench v5 will read all the
configuration information from the
NextMove ES and place it in a Startup
block. For details of the Startup block,
see the MintMT help file.