Heat & Glo LifeStyle RED60 2159-900 Indoor Fireplace User Manual


  Open as PDF
of 98
 
Heat & Glo • RED60 • 2159-900 Rev. R • 9/1278
Figure12.ServicePartsDiagram.
ServiceParts
1
2
3
2
1
ITEM DESCRIPTION PARTNUMBER
Refractory Kit
POR60-L
1
Side Panel (Qty 2 req)
2159-219
2
Panel Side (Qty 2 req)
2159-223
3
Back Panel
2159-222
G. GraniteInstructions
A Granite Kit is available for use with the RED60 models
Install Granite according to these instructions
Figure1.BackPanelPieces.
Figure2.InnerSideWallPieces.
10IN.
16-7/8IN.
19-13/16IN.
16-7/8IN.
Figure3.OutsideCornerTrimPieces.
CAUTION! Risk of Cuts or Abrasions. Wear protective
gloves and safety glasses during installation. Sheet metal
edges are sharp.
NOTICE: Handle granite pieces with care. Granite may
chip or crack if dropped or impacted.
RED60ModelWithoutMedia
This kit contains the components necessary to install the
granite on RED60 models that do not have media installed.
KitContents:
(3) Back panel pieces 19-13/16 inches wide x 16-7/8
inches tall. See Figure 1.
(2) Inner side wall pieces 10 inches wide x 16-7/8 inches
tall. See Figure 2.
Note: Optional Porcelain or Granite Kits used with lighted
and non-lighted media models must be placed in appliance
before placing glass media in the appliance.
NOTICE: The installation of the granite kit may require the
air shutter setting to be changed. See Section 14.K of this
manual to ensure the shutter gap is set correctly before
ring the appliance.
(2) Outside corner trim pieces. See Figure 3.
(7) Securing tabs with (7) sheet metal screws. See Figure 4.
(3) Inner front base pieces 19-3/8 inches long x 4-5/8
inches deep. See Figure 5.
(3) Inner rear Base Pieces 19-3/8 inches long x 3-3/4
inches deep. See Figure 6.
(2) Outside front trim base. See Figure 7.
(2) Front Base Mesh Granite Support. See Figure 8.
(2) Rear Base Mesh Granite Support. See Figure 8.
ToolsRequired
Cordless Drill
1/4 inch hex head driver tip
Pry Bar and Hammer for opening shipping crate
 previous next