Heat & Glo • RED60 • 2159-900 Rev. R • 9/12 77
Figure7.BendTabsUptoa90DegreeAngle.
6. Install glass rocks in base of rebox according to glass
media installation instructions.
7. Install glass frame assembly according to instructions
in installation manual.
8. Install front media tray.
9. Install four retainer clips (included) as shown in Figure
9. Outside corner trim piece will be forced into clip on
front of replace. See Figure 10 and Figure 11.
Figure9.ClipLocation.
Figure8.BendTabsTowardPanel
BENDTABUP
TABBENTTO
90ºANGLE
Figure10.InstallingOutsideCornerTrimPieceontoClip.
Figure11.InstallingOutsideCornerTrimPieceontoClip.
CLIP
WARNING
Delayed Ignition Risk
• Place glass rock according to instructions.
• Do NOT place glass rock in area in front of pilot
or between burner tracks.
• Do NOT place glass rock in a position that they
may fall into area in front of pilot.
• Do NOT use any media other than what is
supplied with this replace.
• Do NOT use more than three 10 lb. bags of glass
rock per replace (when applicable).
• Do NOT use more than ve bags of media in the
replace (when applicable).
Fireplace will not function properly.
Delayed ignition may occur.
CLIP
CORNERTRIM
FORCEDBETWEEN
SURFACES