BT VP1000 Home Security System User Manual


 
Section 2 – Installing Your BT Home Monitor VP1000
BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725
This section will give you all the information you
need to install the BT Home Monitor VP1000 –
within seven easy to follow steps:
Step 1 – Inside The Box.
Step 2 – Activating The Control Panel.
Step 3 – Installing The Wireless Sensors.
Step 4 – Registering For Your BT Home
Monitoring Account.
Step 5 – Completing Installation.
Step 6 – Testing Your System.
If you have purchased additional accessories,
please install the main pack first, followed by
each additional item. A separate installation guide
is enclosed with each accessory.
If at any time you encounter a problem, please
refer in the first instance to the Troubleshooting
and FAQ sections within this guide, also published
online at: www.bt.com/homemonitoring
Alternatively, you can call the BT Home
Monitoring Helpdesk on 0870 240 1979.*
Our advisors are on hand during normal
office hours.
System Requirements
Active telephone line – BT Home Monitoring is
compatible with most forms of residential
telephony connection except ISDN2e.**
Mains 240V power supply for the Control Panel.
This pack provides you with everything else you
need to set up the home monitoring system.
* Call charges will apply.
**Call barring of 0870 numbers will prevent the Control Panel
from dialling the Monitoring Service.
Step 1 – Inside the Box
Here’s what you’ll find inside the BT Home
Monitor VP1000 box:
1 Control Panel – The focal point
of your system. Collects information
from wireless sensors to give status
reports on your home.
1 Keyfob – Switches your system
on and off at the touch of a button.
2 Movement Detectors – Detects
unauthorised movement in rooms.
1 Magnetic Contact – Alerts when
a door or window has been opened.
1 Telephone Cable with Socket
Doubler – Connects your system to
the phone socket.
1 Power Adapter – Connects your
system to the mains power.
Rechargeable Batteries – Allows your
system to function for approximately
8 hours in the event of a power failure.
Mounting Equipment – Allows you
to attach your Control Panel and
sensors to the wall.
Customer Literature
User Guide
Quick Start Guide
Contact Cards
Adhesive Stickers
Monitoring Service Information
If you find that any of the contents are
missing, please ring the BT Home Monitor
helpdesk on 0870 240 1979.
4
SECTION 2