BT VP1000 Home Security System User Manual


 
28
SECTION 4
BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725
System Profile Menu
The System Profile Menu consists of these
options:
Change User Code Test Ext Siren
Add / Del Sensor System Settings
Add / Del Keyfob Comms Settings
Add / Del Keypad Record Speech
Add / Del Siren BT Serial Number
Test Sensors Factory Reset
Change User Code
Up to 8 users can be given unique 4-digit User
Codes, to turn the system on and off, and access
the basic user menu. These unique codes allow
you to identify who has operated the system
and when (if the Alarm On and Off feature is
activated. See next section on Communications
Settings for more details).
The first user code is known as the master code.
This allows access to the System Profile menu
where the default settings can be changed.
Default PIN codes:
Master Code: 2580
User Code 2: 1234
User Codes 3–8: 0000
User codes can only be amended by the master
code user. To change the master codes or user
codes follow the instructions opposite:
PRESS DISPLAY
Until the display shows
SYSTEM PROFILE.
Enter your MASTER CODE.
This will be 2580 until a
personal PIN is selected.
Until display shows
CHANGE USER CODE.
Display shows MASTER CODE.
Display shows MASTER CODE
2580. Overwrite this with your
new MASTER CODE.
To confirm.
Choose either:
To move to USER CODE 2, to
provide someone else with
a unique PIN.
Or
Then <OK> TO EXIT to return
to READY.
Follow the same process to change the PIN
numbers for user codes 2-8. Remember that the
default settings are 1234 for user code 2 and
0000 for user codes 3-8.
NEXT
SHOW / OK
NEXT
SHOW / OK
SHOW / OK
SHOW / OK
NEXT
0
HOME