BT VP1000 Home Security System User Manual


 
BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725
32
SECTION 4
At the Control Panel, follow these instructions:
PRESS DISPLAY
Until the display shows
SYSTEM PROFILE.
Enter your MASTER CODE –
if you have not selected a personal
PIN number, this will be the default
setting – 2580.
Until the display shows
ADD / DEL KEYFOB.
Display will show KEYFOB NO:-
Enter the Keyfob number you want,
e.g. 2, or press NEXT to find the
next available Keyfob location.
As the BT Home Monitor has a
Keyfob supplied number 1 is already
taken and a black box will appear
next to the number signifying that
the slot has been taken. You can
add additional Keyfobs from the
number 2 slot onwards.
Display shows ACTIVATE NOW. Press
the STAR button on the Keyfob.
You will hear a confirmation melody.
Display shows KEYFOB NO: (number),
plus a black box to show the slot is
now taken. The Keyfob is now
registered.
Choose either:
To move to the next Keyfob.
Or
Three times, then <OK> to exit to
return to READY.
Please remember to update your personal
account with this information so that your
monitoring service can report information
accurately. You can do this by ringing the
number shown on your registration form or
via your Internet account.
You may at some point decide you do not wish
to use one or more of the Keyfobs. To delete
a Keyfob from the Control Panel, follow these
instructions:
PRESS DISPLAY
Until the display shows
SYSTEM PROFILE.
Enter your MASTER CODE –
if you have not selected a
personal PIN number, this will
be the default setting – 2580.
Until the display shows
ADD / DEL KEYFOB.
Display shows KEYFOB NO:-
Enter the Keyfob number you wish
to delete e.g. 2 or press NEXT to
scroll through the list.
Display shows
<OFF> TO DELETE.
Display shows KEYFOB NO:
(number).
Choose either:
To move to the next Keyfob.
Or
Three times, then <OK> to exit to
return to READY.
You may also wish to remove the battery.
Please remember to update your personal
account with this information so that your
monitoring service can report information
accurately. You can do this by ringing the
number shown on your registration form or
via your Internet account.
NEXT
SHOW / OK
NEXT
SHOW / OK
SHOW / OK
NEXT
0
HOME
NEXT
SHOW / OK
NEXT
SHOW / OK
SHOW / OK
0
OFF
NEXT
0
HOME