Filter
Top Products
Section 3 – Using Your BT Home Monitor VP1000
BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725
This section describes the day to day use of the
BT Home Monitor VP1000 security and reporting
system.
The Control Panel
Using the Control Panel you can manage all
system functions. One set of buttons can be
found on the exterior of the panel. Those assist
you in navigating the various menu selections.
There are also four indicator lights which show
alerts and the system status. See Fig. 16.
Fig 16
Button Function
To move to the next step.
To confirm a setting.
Indicator
Light Lights when
ON The system is switched on.
CHECK There is something needing attention.
CHIME The chime function is switched on.
POWER The system has mains power.
More buttons are accessed by opening the flap.
These carry out one-touch operations.
See Fig. 17.
Fig 17
The buttons function as follows:
Button Function
Volume UP.
Record Speech.
Reserved for Future Devices.
Volume Down.
Listen to Speech.
Reserved for Future Devices.
Mute Speaker.
Chime ON/OFF.
Reserved for Future Devices.
Switches system ON.
Switches system ON at home.
Switches system OFF.
Navigates backwards.
Sends a help message.
Sends a fire message and sounds
the siren.
+
Sends an emergency message and
sounds the siren.
0
BACK
0
OFF
0
HOME
0
ON
9
0
8
0
7
0
6
0
5
0
4
0
–
3
0
2
0
1
0
+
Next Show / OK
16
SECTION 3
123
456
789
0 #
+
–
ON
HOME
TEST
OFF
BACK
NEXT
SHOW / OK
Indicator
lights