Filter
Top Products
SHOW / OK
NEXT
SHOW / OK
NEXT
0
HOME
BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725
To name the room in which the detector is to be
located, follow these instructions:
PRESS DISPLAY
Display shows S (number):
LOCATION.
You need to choose from the
following list of locations.
Scroll through these options.
1. Attic 17. Hall
2. Back Door 18. Kitchen
3. Basement 19. Laundry
4. Bathroom 20. Living Room
5. Bedroom 21. Master Bath
6. Child Room 22. Master Bdrm
7. Conservatory 23. Study
8. Play Room 24. Upstairs
9. Dining Room 25. Utility Room
10. Downstairs 26. Garden
11. Emergency 27. Custom 1
12. Fire 28. Custom 2
13. Front Door 29. Custom 3
14. Garage 30. Custom 4
15. Garage Door 31. Custom 5
16. Guest Room
Please refer to Section 4 Record
Speech for more information on
Custom Locations.
To confirm the change.
To decide if you want the sensor to make a
sound when triggered, when the system is
switched off, follow these instructions:
One useful application is to configure a sensor
near your front door to CHIME when it is opened,
so you know when someone has entered your
house.
Note that the chime function must be activated
by pressing the number 8 button on the Control
Panel keypad.
PRESS DISPLAY
Display shows S (number): CHIME.
Choose by scrolling through the
following options.
Scroll through these options
and select the way you want
your sensor to work.
1. Chime off.
2. Melody Chime.
3. Sensor Name.
Display shows S (number):
Choose either:
To move to the next sensor.
Or
Three times, then <OK> to exit to
return to READY.
Please remember to update your personal
account with this information so that your
monitoring service can report information
accurately. You can do this by ringing the
number shown on your registration form or
via your Internet account.
SHOW / OK
SHOW / OK
NEXT
30
SECTION 4