Filter
Top Products
SHOW / OK
SHOW / OK
BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725
SELECTING THE SENSOR RESPONSE TYPE
The Response Type is the way your sensor will
react when triggered. You can change this
setting at any time, should you decide you want
a different type of response to occur.
Note that options 1 to 5 are not 24 hour sensors,
meaning they will only respond when your security
system is switched on. Options 6 to 10 are 24
hour sensors. They are active even when your
system is not switched on. An example of a 24
hour sensor is the smoke detector which monitors
for smoke whether you are at home or away.
PRESS DISPLAY
Display shows
S (number): RESPONSE--.
Choose by scrolling through the
following options. For more detail
on how these options work, please
refer to Section 3.
1. Home 6. Help Silent
2. Home & 7. Alarm
House 8. Fire
3. Walk-Thru 9. Non-Alarm
4. Entry 1 10. Emergency
5. Entry 2
To confirm the change.
SELECTING THE SENSOR NAME
Allocating a location is important because the
details will be shown on any alert message sent
by the BT Home Monitoring service. This ensures
you know whether intrusion has occurred via the
front door or if movement is sensed in a specific
room. To name the sensor, choose a name from
the available list.
PRESS DISPLAY
Display shows
S (number): LOCATION--
You need to choose from the
list of locations.
Scroll through these options.
1. Attic 17. Hall
2. Back Door 18. Kitchen
3. Basement 19. Laundry
4. Bathroom 20. Living Room
5. Bedroom 21. Master Bath
6. Child Room 22. Master Bdrm
7. Conservatory 23. Study
8. Play Room 24. Upstairs
9. Dining Room 25. Utility Room
10. Downstairs 26. Garden
11. Emergency 27. Custom 1
12. Fire 28. Custom 2
13. Front Door 29. Custom 3
14. Garage 30. Custom 4
15. Garage Door 31. Custom 5
16. Guest Room
Please refer to Section 4, Record
Speech for more information on
Custom Locations.
To confirm the change.
SHOW / OK
SHOW / OK
SHOW / OK
NEXT
NEXT
40
SECTION 5