BT VP1000 Home Security System User Manual


 
NEXT
SHOW / OK
NEXT
SHOW / OK
SHOW / OK
0
OFF
NEXT
0
HOME
BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725
Add / Delete Keyfob
ADDING AND NUMBERING A KEYFOB
At the Control Panel, follow these instructions:
PRESS DISPLAY
Until the display shows
SYSTEM PROFILE.
Enter your MASTER CODE –
if you have not selected a
personal PIN number, this will
be the default setting – 2580.
Until the display shows
ADD / DEL KEYFOB.
Display will show KEYFOB NO:-
Enter the Keyfob number you
want, e.g. 2, or press NEXT to find
the next available Keyfob location.
As the BT Home Monitor has a
Keyfob supplied, number 1 is already
taken and a black box will appear
next to the number signifying that
the slot has been taken. You can
add additional Keyfobs from the
number 2 slot onwards.
Display shows ACTIVATE NOW.
Press the STAR button on the
Keyfob. You will hear a confirmation
melody.
Display shows KEYFOB NO:
(number), plus a black box to show
the slot is now taken. The Keyfob
is now registered.
Choose either:
To move to the next Keyfob.
Or
Three times then <OK> to exit
to return to READY.
DELETING A KEYFOB
You may at some point decide you do not wish
to use one or more Keyfobs. To delete a Keyfob
from the Control Panel, follow these instructions:
PRESS DISPLAY
Until the display shows
SYSTEM PROFILE.
Enter your MASTER CODE –
if you have not selected a
personal PIN number, this will
be the default setting – 2580.
Until the display shows
ADD / DEL KEYFOB.
Display shows KEYFOB NO:-
Enter the Keyfob number you wish
to delete e.g. 2 or press NEXT to
scroll through the list.
Display shows
<OFF> TO DELETE.
Display shows KEYFOB NO:--.
Choose either:
To move to the next Keyfob.
Or
Three times then <OK> to exit
to return to READY.
You may also wish to remove the battery.
NEXT
SHOW / OK
NEXT
SHOW / OK
SHOW / OK
NEXT
0
HOME
42
SECTION 5