BT VP1000 Home Security System User Manual


 
BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725
33
SECTION 4
Add / Delete Keypad
The BT Home Monitor Keypad acts as a wireless
remote control for your BT Home Monitor
VP1000 system.
Carry with you around the home to turn your
Security System on and off, or change settings,
at the touch of a button. As it comes with a
wall bracket you can mount the Keypad in a
convenient location. This is particularly useful if
your Control Panel is located somewhere other
than your usual entry point. You can have 2
Keypads registered with the Control Panel.
At the Control Panel follow these instructions:
PRESS DISPLAY
Until the display shows
SYSTEM PROFILE.
Enter your MASTER CODE –
if you have not selected a
personal PIN number, this will
be the default setting – 2580.
Until the display shows
ADD / DEL KEYPAD 1.
Display shows 1-WAY KP NO:-
Enter the Keypad number you
want. e.g. 1 or press NEXT to
find the next available Keypad
number.
Display shows ACTIVATE NOW.
Press the button (next to 0) on
the Keypad for two seconds. You
will hear a confirmation melody.
Display shows KEYPAD NO:
(number) e.g. . The Keypad is
now registered.
Choose either:
To move to the next keypad.
Or
Three times, then <OK> to exit to
return to READY.
Please remember to update your personal
online account with this information so that your
monitoring service can report information
accurately.
You may at some point decide you do not wish
to use one or more of the Keypads. To delete
a Keypad from the Control Panel, follow these
instructions:
PRESS DISPLAY
Until the display shows
SYSTEM PROFILE.
Enter your MASTER CODE –
if you have not selected a
personal PIN number, this will
be the default setting – 2580.
Until the display shows
ADD / DEL KEYPAD.
Display shows KEYPAD NO:-
Enter the Keypad number you wish
to delete e.g. 1 or press NEXT to
scroll through the list.
Display shows
<OFF> TO DELETE.
Display shows KEYPAD NO:
(number).
Choose either:
To move to the next Keypad.
Or
Three times, then <OK> to exit to
return to READY.
You may also wish to remove the battery.
Please remember to update your personal
account with this information so that your
monitoring service can report information
accurately. You can do this by ringing the
number shown on your registration form or
via your Internet account.
Add / Delete Siren
Please see the user guide provided with your Siren.
NEXT
SHOW / OK
NEXT
SHOW / OK
SHOW / OK
NEXT
0
HOME
NEXT
SHOW / OK
NEXT
SHOW / OK
SHOW / OK
0
OFF
NEXT
0
HOME