Filter
Top Products
4-28 SECTION 4: MASTER FILE ENTRY
SE 818 DEVICE CONFIGURATION ENTRY [d818entr]
Complete the [d818entr] screen for all 818-series and NexSentry ACUs (use F2 to display the
screen after the previous screen, [d808entr] or [nexsentr], have been stored). A sample screen
follows:
PIN Seed. Optional. Enter the base seed number for generating PINs. The value entered
has priority over the system default PIN seed value entered with the [pndfentr] screen (see
SE 422 Pin Definition in this section). Default is 0.
Duress PIN Digits. Optional. Enter the allowed number of digits for a PIN duress code.
Default is 0.
Print PINs. Optional. A Y / N field indicating if the PIN should be displayed once calculated.
Default is Y.
PIN Timeout. Optional. Enter the maximum number of seconds allowed between key
presentation and PIN entry. Default is 10.
Max PIN Retries. Optional. Enter the allowed number of PIN entry retries. Default is 4.
VIP Only Digits. Optional for keypad-controlled doors only. Enter the allowed number of
digits for the PIN (4—8). Default is 4.
Duress Report. Optional. Enter an action report number (1—32) indicating the action the
ACU is to take should a duress event occur. Default is 0.
Duress Enable. Optional. A Y / N field indicating whether the duress feature is enabled.
Default is Y.
SE 422 DEVICE CONFIGURATION ENTRY [d422entr]
Complete the [d422entr] screen for SE 422 ACUs (use F2 to display the screen after the previous
screen has been stored). A sample screen follows:
1
2