Westinghouse SE 6000 Home Security System User Manual


 
4-50 Section 4: Master File Entry
MAPS
The DRAWMAPS function is used by the event monitoring function to display the location of doors,
points, alarms, etc. To use this feature on an SE 6200 and above, it must be operating under the
Reflection 4 terminal emulation software (mouse required). You can also use this feature on an
SE 6100 or below from your console. This requirement is due to the SCO Unix graphic memory
limitation. The function has several built-in HELP maps, and drawing instructions display at the
foot of all screens. A sample map follows:
MAP DRAWING COMMANDS AND DESCRIPTIONS
COMMAND DESCRIPTION
Delete Ob Remove graphics and text. Once selected, the menu list shows only those object types
currently on the map. Select one, then follow deletion instructions.