Westinghouse SE 6000 Home Security System User Manual


 
# Message Explanation
APPENDIX C: SYSTEM TRANSACTIONS — NUMERICAL SEQUENCE C-3
54 Device Online ACU communicating with host.
55 Request Manual Access Manual access command entered.
56 (Building Closed Trace) Obsolete message
58 Repack OK Host has loaded new database information.
59 Error Setting Bldg. Mode Building mode command unsuccessful.
60 Key Activated Key presented to activate reader — activate card enabled.
61 Key Deactivated Key presented to deactivate reader — deactivate card enabled.
62 Key Not Active Access denied — key applies to activate reader.
63 New Day Host rebooted or clock has crossed 00:00.
64 Remote Trans Received Dial-up device transmission received by host.
65 Host Dial OK Host has called a dial-up device.
66 Error Dialing Remote Download errors to remote dial-up device encountered.
67 Output Activated Output contact manually or automatically activated.
68 Output Deactivated Output contact manually or automatically deactivated.
69 Invalid PIN Entered PIN entered incorrect.
70 Redundancy On Not used at this time.
71 Redundancy Off Not used at this time.
72 Host Poller Down Not used at this time.
73 Acknowledge DB Xfer Data successfully downloaded to target device.
74 Failed DB Xfer Data download attempt to target device failed.
75 No Key Set for PIN PIN entered without valid key presentation.
76 Keyholder Duress PIN entered in reverse sequence indicating a duress situation. If
valid, access is granted.
77 Controller Comm Error Host to local controller communication failed.
78 RDI Dialed In RDI unit has dialed host and is logged in.
79 Lot Full Optional parking function.
80 Max Tenant In Lot Optional parking function.
81 Alarm Resolved Alarm event resolved.
82 Enter Attended Mode Optional parking function.