Filter
Top Products
4-24 SECTION 4: MASTER FILE ENTRY
SE 8XX-SERIES DEVICE CONFIGURATION ENTRY [d808entr]
The [d808entr] screen must be completed for all 8xx-series ACUs (use F2 to display the screen
after the previous screen has been stored). A sample screen follows:
Level, Name, Password. Required. These first three fields are entered to identify up to eight
operators who will be permitted to set/change system parameters for a particular ACU from
the ACU terminal port. User 1 must be established (defaults to operator 1); operators 2
through 7 are optional. Enter the operator's security code (A through F), name and password.
The security codes A through F control the degree to which the operator may add/change/
delete the system parameters from the ACU terminal port. Code A has the most privileges,
code F has the least. For detailed information concerning operator privilege levels, refer to
the applicable ACU manual.
NOTE
The Level, Name and Password fields are specific to individual 804/808 ACUs and apply only
to operators logging in directly via the ACU's terminal port. The fields are not part of the SE
6000 control parameters.
Tamper. Optional. Enter the tamper report number if a report has been created (see
applicable ACU manual). The report states the system actions that will be taken if the ACU
enclosure housing is opened. Default is 0.
2
11
1