Filter
Top Products
APPENDIX B: SYSTEM SCREEN HIERARCHIES B-1
MONITOR SECURITY ACTIVITY
SCREEN TITLE FUNCTION
monitor Watch events and activities as they occur; menu to other monitoring and control screens.
ctrlmenu Menu to control functions. Zone selection stays in effect until this screen is exited.
ctrlpoll Select pollers to halt or restart, and to check device communication.
devcomm Check communication between computer and attached devices.
ctrldev Select devices to reset / shunt / unshunt, and to check status.
devstat Check point status for a particular device.
ctrllock Select locks to open, lock, time open, shunt, unshunt.
ctrlinp Select input points to shunt, unshunt.
ctrlout Select output points to activate, deactivate, shunt, unshunt.
ctrldoor Select door switch points to view status, shunt, unshunt.
selzone Select zone to which the control and monitoring will be limited.
revtran Page forwards / backwards through the last 5,000 system transactions.
alrmserv Display currently pending alarms; provides response instructions, map.
viewmap Display user-created map showing alarm locations.
insrtns Display user-created list of actions to be taken when an alarm occurs at a specific point.
response View copy of alarm instructions; enter actions taken in response to the alarm.
dispmap Display user-created system maps showing alarms, door status, lock status, etc.
othrmenu Menu to several system control functions.
ctrlprnt Reset, turn on, turn off system log printers.
psbkfrgv Restore passback status for a single keyholder, or for all keyholders in the system.
manacc Allow entry for keyholder who does not have a key (operator and keyholder data logged).
download Extract database information, then update memory for host and attached devices.
rem_dev Establish connection with a remotely connected device.
bld_mod View and control building modes for individual ACUs or all ACUs in a zone.
monitor Provides a full-screen display (22 lines) of real-time transactions.
SECURITY MANAGEMENT REPORTS
SCREEN TITLE FUNCTION
accsmenu Menu to the security management reporting functions.
phstrprt Report last twenty activities which took place at a specific point.
chstrprt Report last twenty activities which took place for a specific keyholder.
excprprt Report transactions currently stored on the hard disk.
acrtrprt Report transactions currently stored on tape.
almarprt Report of operator responses to alarms.
whowhere Report number of keyholders in each passback level.
downrprt Report database changes. Serves also as an audit trail of operator activity.
k2nrprt Report last zone entered (summary or detail). Uses keyholder history as source.
evptrprt Report system events — totals for each event within a selected date range.
rpasrprt Report real-time zone passback activity showing how many and / or who is currently in
which zone. Uses shared memory data as source.
MASTER FILE ENTRY
SCREEN TITLE FUNCTION
key_entr Enter primary keyholder information: keyholder ID, key number, name, tenant, etc.
key1entr Enter keyholder personal information: address, phone, title, floor, remarks, etc.
empgentr Assign access privileges to a keyholder.
epj_entr Assign projects to a keyholder.