Filter
Top Products
4-26 SECTION 4: MASTER FILE ENTRY
Building Closed Time Codes. Optional. Provides up to four time intervals during which the
building should be closed. Default is 0.
Building Open Reminder. Optional. If the building should be closed (indicated by the time
codes entered in the previous field), a reminder message is logged and repeated for the
number of minutes specified (0 to 240). Default is 0.
SE NEXSENTRY DEVICE CONFIGURATION ENTRY [nexsentr]
Complete the [nexsentr] screen for the NexSentry ACU and then press F2 Next Form to display
the [d818entr] screen. Enter all appropriate information and press F6 Store to complete the
NexSentry device configuration. A sample [nexsentr] screen follows:
Level, Name, Password. Required. These first three fields are entered to identify up to eight
operators who will be permitted to set/change system parameters for a particular ACU from
the ACU terminal port. User 1 must be established (defaults to operator 1); operators 2
through 7 are optional. Enter the operator's security code (A through F), name and password.
The security codes A through F control the degree to which the operator may add/change/
delete the system parameters from the ACU terminal port. Code A has the most privileges,
code F has the least. For detailed information concerning operator privilege levels, refer to
the applicable ACU manual.
2
1
11