Westinghouse SE 6000 Home Security System User Manual


 
6-8 SECTION 6: SYSTEM ADMINISTRATION
PURGE A PENDING REPORT [purgrprt]
Use this feature to halt a report currently being printed (applies only to reports created under your
ID). The feature can also be used to display reports. Note that if you log on using addusers you
will have complete printer control.
ENABLE TERMINALS FOR GLOBAL BEEPING [beepentr]
This feature is used to enable terminals to beep when an alarm occurs. Obtain terminal IDs (port
connection — tty___) from system installer and enter with optional description.
SYSTEM CONFIGURATION (syclmenu)
CONTROL FILE MAINTENANCE [ctrlentr]
For informational / custom reporting purposes, certain field titles that display in keyholder record
screens [key_entr] and [key1entr] can be changed to suit the individual user. Since keyholder
records may be considered the primary data items for an access control system, many SE 6000
owners use the field title change feature to tailor the system to their precise requirements. Change
fields A through F and 1 through 7 as required.
TERMINAL AUTO SWITCH [ctrlentr]. An additional field at the foot of this screen is optionally used to
set up a particular terminal to automatically switch to the alarm servicing screen (from monitor)
when an alarm occurs. A sample screen follows: