Filter
Top Products
SEFFNT - The data stream converter does not
support the SEFFNT DJDE.
Explanation: A SEFFNT DJDE, which InfoPrint XT
does not support, is present.
SEFMAP - The data stream converter does not
support the SEFMAP DJDE.
Explanation: A SEFMAP DJDE, which InfoPrint XT
does not support, is present.
SHIFT - The data stream converter will ignore
SHIFT DJDEs.
Explanation: The data stream converter found a
SHIFT DJDE, but the conversion parameters include
xhonorshift=no. xhonorshift=no is the default.
InfoPrint XT does not shift the output.
SHIFT - Printing on subsequent sheets will not
shift up or down | to the left or right.
Explanation: The data stream converter found a
SHIFT=NO DJDE, which prevents the output from
shifting in the directions specified.
SHIFT - Printing on subsequent sheets will not
shift on front sides, but will shift
bk_inches inches (bk_pels pels) to the left |
to the right | up | down on back sides.
Explanation: A SHIFT DJDE specified that front-side
printing does not shift. Back-side printing does shift
bk_inches inches in the direction specified.
SHIFT - Printing on subsequent sheets will shift
fr_inches inches (ft_pels pels) to the left |
to the right | up | down on front sides,
but will not shift on back sides.
Explanation: A SHIFT DJDE specified that front-side
printing shifts fr_inches inches in the direction specified.
Back-side printing does not shift.
SHIFT - Printing on subsequent sheets will shift
fr_inches inches (ft_pels pels) to the left |
to the right | up | down on front sides,
and bk_inches inches (bk_pels pels) to the
left | to the right | up | down on back
sides.
Explanation: A SHIFT DJDE specified that front-side
printing shifts fr_inches inches and bk_inches inches on
back sides, in the directions specified.
SIDE - The current logical page will begin on
the front | back of a new sheet.
Explanation: This message occurs when the SIDE=
specification forces the start of a new sheet. InfoPrint
XT indicates whether the page begins on the front or
back of a new sheet.
SIDE - The current logical page will begin on
the back of the current sheet. The data
stream converter will | will not offset the
page.
Explanation: This message occurs when the SIDE=
specification does not force a new sheet. InfoPrint XT
indicates whether the page offsets.
STOCKS - A DJDE specified STOCKSET stk_name.
Command Stock
Reference
Cluster
Name
Media
Source
INIFEED stk_ref cl_name mmc_tray
SYSPAGE stk_ref cl_name mmc_tray
ASSIGN stk_ref cl_name mmc_tray
Explanation: STOCKSET correlates each stock
reference, stk_name, to a cluster name, cl_name. The
reformatted cluster database in effect then correlates
each cluster, cl_name, to an input media source tray,
mmc_tray. INIFEED identifies the stock that InfoPrint
XT uses if no OUTPUT FEED or OUTPUT DJDE
commands are in effect. SYSPAGE identifies the stock
that InfoPrint XT uses for Xerox system-generated
pages, such as the accounting pages at the ends of
reports. ASSIGN associates stock references with cluster
names.
STOCKS - The data stream converter will ignore
the STOCKS DJDE.
Explanation: A STOCKS DJDE is present. However,
the value of the xclb conversion parameter is none. Or,
xclb is not present and InfoPrint XT did not find the
default clustr.alb in the reformatted Xerox resource
directory. Verify that the xclb parameter has the correct
value.
TOF - The new top of form (TOF) line number
is number.
Explanation: Specifies the line number for the top of
the form.
XMP - The data stream converter does not
support the XMP DJDE.
Explanation: An XMP DJDE, which InfoPrint XT does
not support, is present.
Appendix E. DJDE report messages: ALTER through XMP 153
|
|