Filter
Top Products
CLUSTRLIB=NONE XHONORFCB2=NO TWOPASS CAOBS MFDEF=F1AIOMFD XHONORSHIFT=NO XJES3211=YES
XPATTERN_SET=300-1 XAFPFUNCTION=IOCA_RT XRESOLUTION=300
XHONORSTAPLE=NO XSTAPLEORIENT=NO XSTAPLESYSGEN=1TON
Processing ended with return code 0.
The different sections of the pdxtx2afp.log file contain these types of information:
5016-503 Transform arguments (pdxtx2afp): 1
Lists the transform arguments that were in effect for the job. The name in
parentheses indicates the component that supplied the arguments. The
arguments were explicitly specified, or InfoPrint XT derived the arguments,
or they are a combination of specified and derived arguments. It is possible
to have several transform arguments sections. For example, the file might
contain a section for arguments that were specified through the
PDXTX2AFP_ARGS environment variable, and a section for arguments
that were specified by the pdxtx2afp command:
5016-503 Transform arguments (PDXTX2AFP_ARGS):
5016-504 -x "xrptfile=."
5016-503 Transform arguments (pdxtx2afp):
5016-504 -x "xjdl=pdxton xjde=strton xcc=a xrecfm=v xclb=none xafprc=4"
5016-505 Transform directives (pdxtx2afp -t): 2
Lists the transform directives that the -t command option specified. This
section is only present if you used the command option.
If you specify transform directives with the pdxtx2afp.directives file or
with the PDXTX2AFP_DIRECTIVES environment file, InfoPrint XT adds
sections that show the directives that you specified through those methods.
5016-509 Command Sequence: 3
Lists the commands, in order, that InfoPrint XT issued when it processed
the job.
5016-511 Return codes: 4
Lists the return codes from each of the commands that were identified in
the Command Sequence section.
5016-513 Impressions (pages): 28 5
If InfoPrint XT generated AFP output for the job, this message lists the
number of pages that InfoPrint XT produced.
5016-521 x2afp.lst: 6
If you processed the job using the pdxtx2afp command, the log file also
contains information from the InfoPrint XT data stream converter. If you
processed the job with the pdpr command in a combined InfoPrint
Manager and InfoPrint XT installation, the log file does not contain the
x2afp.lst information. However, if the job had errors, InfoPrint XT includes
the list information from the data stream converter on the error sheet that
prints with the job.
x2afp.lst file
The x2afp.lst file contains the results of the data stream conversion process. The
contents of this file can help you determine what caused the failure. InfoPrint XT
also creates this file when the conversion process is successful. This is an example
of how the information from the x2afp.lst file prints on the error sheet:
5016-521 x2afp.lst
AIOUT1002S Unrecognized option for the keyword: xrecfm=nv. Valid options for
this keyword are:
90 InfoPrint XT Guide