Filter
Top Products
RFORM - Overlay overlay_name will appear on the
front of routing text pages.
Explanation: Specifies that the AFP overlay
overlay_name will print on all RTEXT pages.
ROFFSET - The data stream converter will offset the
current sheet.
Explanation: An ROFFSET statement is present.
InfoPrint XT offsets the current sheet.
RPAGE - The current logical page will move to
the front | back of a new sheet.
Explanation: This message occurs when the job
specifies RPAGE WHEN=TOP and the SIDE=
parameter forces the start of a new sheet. InfoPrint XT
indicates whether the page moves to the front or back.
RPAGE - The current logical page will move to
the back of the current sheet.
Explanation: This message occurs when a specification
of SIDE=NEXT or SIDE=BACK forces output to the
back of the current sheet.
RPAGE - The next logical page will begin on the
front | back of a new sheet.
Explanation: This message occurs when the job
specifies RPAGE WHEN=BOTTOM and the SIDE=
parameter forces the start of a new sheet. InfoPrint XT
indicates whether the page begins on the front or the
back of the sheet.
RPAGE - The next logical page will begin on the
back of the current sheet.
Explanation: This message occurs when a specification
of SIDE=NEXT or SIDE=BACK does not force a new
sheet.
RPAGE - The remaining text for the logical page
will move to the front | back of a new
sheet.
Explanation: This message occurs when the job
specifies RPAGE WHEN=NOW and the SIDE=
parameter forces the start of a new sheet. InfoPrint XT
indicates whether the remaining text moves to the front
or back of a new sheet.
RPAGE - The remaining text for the logical page
will move to the back of the current
sheet. The data stream converter will |
will not offset the page.
Explanation: This message occurs when a specification
of SIDE=NEXT or SIDE=BACK does not force a new
sheet. InfoPrint XT indicates whether the page offsets.
RRESUME - Printing will resume. The RRESUME
record will | will not print.
Explanation: Specifies whether the current record
prints when printing resumes.
RSTACK - The data stream converter found the end
of the current report. The RSTACK
record will | will not print.
Explanation: The starting print environment is now in
effect. The message specifies whether the RSTACK
record prints.
RSUSPEND - The data stream converter will
suspend printing until it finds the end
of report or an RRESUME record. The
RSUSPEND record will | will not print.
Explanation: Specifies whether print retention starts
with the current record.
RTEXT - A DJDE provided the following routing
text information:
Report
copy
line no. column no. Xerox
font name
AFP
name(s)
copy_num
copy_num
.
.
.
line_num
line_num
column_num
column_num
xrx_name
xrx_name
afp_name
afp_name
text
Explanation: copy_num identifies the report copy.
line_num identifies the line number of the report.
column_num identifies the column number of the report.
xrx_name identifies the name of the Xerox font.
afp_name identifies either a coded font name or a code
page and character set pair.
RTEXT - The report will not include routing text.
Explanation: The data stream converter found an
RTEXT=NONE DJDE.
SAVE - The data stream converter does not
support the SAVE DJDE.
Explanation: A SAVE DJDE, which InfoPrint XT does
not support, is present.
152 InfoPrint XT Guide
|
|
|
|
|