Filter
Top Products
[xlrecl=80 | nnnnn]
Specifies the record length of the records in the job. If you specify a
corresponding xrecfm=fixed parameter, the valid range is 1 through 32760.
If you specify xrecfm=variable, the valid range is 1 through 32756. If you
do not specify this parameter, the default is 80.
[xmicrfont=none | all | xerox | xerox+font1:font2:font3 | xerox-font1:font2:font3 |
font1:font2:font3]
Specifies whether InfoPrint XT generates AFP magnetic ink character
recognition (MICR) fonts when it loads Xerox fonts that FILE DJDEs
identify. You can use one of these values:
none InfoPrint XT does not generate AFP MICR fonts for any of the
Xerox fonts that it loads from FILE DJDE commands. This is the
default.
all InfoPrint XT generates AFP MICR fonts for all the Xerox fonts that
it loads from FILE DJDE commands in the job.
xerox InfoPrint XT generates AFP MICR fonts for all Xerox fonts whose
names begin with these standard prefixes for MICR font names:
v E13B
v E14B
v CMC7
For
example, InfoPrint XT generates AFP MICR fonts for these
Xerox fonts: E13BPX.FNT, E14BL.FNT, CMC7J.FNT.
xerox+font1:font2:font3
InfoPrint XT generates AFP MICR fonts for all Xerox fonts whose
names begin with E13B, E14B, or CMC7. In addition, it generates
AFP MICR fonts for up to three fonts that you specify by name.
Separate the font names with colons (:). The fonts you specify can
be any Xerox fonts.
xerox-font1:font2:font3
InfoPrint XT generates AFP MICR fonts for all Xerox fonts whose
names begin with E13B, E14B, or CMC7 except for the fonts you
specify after the minus sign (-). You can specify up to three Xerox
fonts that begin with the standard prefixes for MICR font names.
Separate the font names with colons.
font1:font2:font3
InfoPrint XT generates AFP MICR fonts for the Xerox fonts you
specify. You can specify up to three fonts. Separate the font names
with colons. The fonts you specify can be any Xerox fonts.
InfoPrint XT does not generate AFP MICR fonts for any Xerox
fonts that begin with the standard prefixes for MICR font names
unless you specify them in the list of fonts.
Note:
To name more than three fonts, you can specify more than one
xmicrfont conversion parameter, up to 11 occurrences that specify a
combined total of 33 fonts. Values for all occurrences of the
conversion parameter must be of the same type, either xerox+,
xerox-, or user-specified names.
[xpaper=letter
| ledger | folio | A3 | A4 | A4LT | B4]
Specifies the paper size for jobs that specify inline forms through FILE
98 InfoPrint XT Guide
|
|
|
|
|
|
|
||
|
|
||
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|