Filter
Top Products
5018-826 The image converter did not recognize
scan orientation transformation input
value inputvalue in resource resourcename.
Explanation: The transformation input value specified
for the scan orientation is not valid.
System action: InfoPrint XT cannot convert the image.
User response: Verify that the resource is a valid
Xerox image resource. If it is valid, contact your
technical support representative.
5018-827 The code page codepage does not contain
valid AFPDS.
Explanation: The specified code page is not a valid
Advanced Function Presentation (AFP) code page.
System action: InfoPrint XT cannot process the
request.
User response: Specify a valid AFP code page and
enter the command again.
5018-829 Xerox font fontname contains no valid
code points.
Explanation: Because the Xerox font does not contain
any code points that the transform can process,
InfoPrint XT cannot generate an AFP font.
System action: InfoPrint XT cannot process the
request.
User response: Do not request any more loads of this
resource. Contact your technical support representative.
5018-830 Error return code from compression
algorithm: ReturnCode.
Explanation: The compression algorithms reported an
error while compressing the data.
System action: InfoPrint XT continues processing.
User response: See the error listing for error messages
that identify the problem.
5018-831 The image converter found unknown
Line Control Code x'linecontrolcode' (error
ReturnCode).
Explanation: While decompressing the Xerox image,
InfoPrint XT found an incorrect Line Control Code
(LCC).
System action: InfoPrint XT cannot process the
request.
User response: Verify that the resource is a valid
Xerox image resource. If it is valid, contact your
technical support representative.
5018-832 Current position in compressed image:
%d.
Explanation: InfoPrint XT found an error while
processing the compressed image data. The message
provides the offset for the compressed image data.
System action: InfoPrint XT cannot process the
request.
User response: See the error listing for error messages
that identify the problem.
5018-833 Current position in uncompressed
image: location.
Explanation: InfoPrint XT found an error while
processing the uncompressed image data. The message
provides the offset in the uncompressed image data.
System action: InfoPrint XT cannot process the
request.
User response: See the error listing for error messages
that identify the problem.
5018-834 End of image not encountered.
Explanation: InfoPrint XT did not find X'71' at the end
of the image.
System action: InfoPrint XT continues processing.
User response: This is an informational message and
requires no user response.
5018-835 The image converter found an
unsupported scan orientation of
scanorientation in resource resourcename.
Explanation: The scan orientation used to create the
image is not portrait. InfoPrint XT only supports the
portrait scan orientation in Restricted Raster Encoding
image resources.
System action: InfoPrint XT cannot convert the image.
User response: Verify that the resource is a valid
Xerox image resource. If it is valid, contact your
technical support representative.
5018-836 Resource resourcename specifies
samplecount samples per pixel.
Explanation: InfoPrint XT supports a maximum of
two samples per pixel in Restricted Raster Encoding
image resources.
System action: InfoPrint XT cannot convert the image.
User response: Verify that the resource is a valid
Xerox image resource. If it is valid, contact your
technical support representative.
Appendix C. Resource converter messages: 5018-nnn 119