Filter
Top Products
77NetBotz Appliance User’s Guide
E-mail Server
Double-click the E-mail Server icon to open the E-Mail Server Configuration window. Configure the
following fields and click OK. Click Test E-mail Server to test your e-mail server settings.
All settings except From address to appear in appliance e-mails are available for both a primary
e-mail server and a secondary backup e-mail server.
External Storage
Use the External Storage icon to configure your appliance to store data on the optional External Storage
System or a network attached storage (NAS) device (a Windows share or an NFS mount). A maximum
of 5000 objects such as alerts and picture clips can be stored using External Storage. Sensor readings do
not count against the maximum number of objects stored.
Note: Not all NAS devices that work with Windows systems use one of the supported
implementations. Some devices may use proprietary protocols and standards that require
additional drivers to communicate with the share. Some NAS devices may not be usable.
Caution: Configuring your appliance to use external storage should be performed by your
system administrator.
The following NAS implementations are supported:
• Microsoft Windows 2000/XP/2003
• Microsoft Windows Storage Server
• Samba V2.2.6 or later (on Linux)
• NFS V3.x or later
Field Description
From address to appear in
appliance e-mails
The e-mail address that appears in the From field of e-mail generated
by the appliance.
SMTP server The IP address of the SMTP server used to send E-mail.
Port The IP port on the e-mail server used for SMTP communications.
SSL options The SSL options for communications between the appliance and the
SMTP server.
Requires logon Select this check box if the server requires you to log in to send e-mail.
User name Enter a user name that will be accepted by the SMTP server when
sending e-mail.
Password Enter a Password that will be accepted by the SMTP server when
sending e-mail.
Verify password Type the password again to confirm.