Filter
Top Products
37NetBotz Appliance User’s Guide
When you finish updating the camera settings, click OK. Click Cancel to close this window without
saving any changes.
Speaker Label An additional label for the speaker on this pod (camera pods and
CCTV adapter pods only).
Unplugged Alert Severity The severity of alerts generated if this device is unplugged.
Unplugged Alert Profile The actions taken if the camera pod is unplugged. By default, the
default alert profile is used for all thresholds. If you create
additional alert profiles, you can specify an alert profile other than
default.
Enable video from camera Enable video output from the camera pod. You can set an Advanced
Schedule that specifies times at which video output is enabled. To
configure Advanced Scheduling:
1. Check Enable video from camera.
2. Click Advanced Scheduling.
3. By default, all time periods in the schedule are Enabled. To
disable video output for a period of time, click and drag to
select the time range, and click Disable.
4. Click OK.
Enable audio from camera drop-down
list
Select the conditions that cause audio streaming from the camera
pod to the Advanced View Camera View. This option is available
only when configuring camera pods.
Interactive Frame Rate Limit (Percent) Specify what percentage of the total possible frame rate for a given
camera resolution is available to users that are using the appliance
interactively.
For example, if you specified an Interactive Frame Rate Limit of
50% and your maximum frame rate for 640x480 resolution is 10
frames per second, you can only select frame rate values of up to 5
frames per second.
Interactive Mode Limit The maximum image resolution available to users that are using the
appliance interactively. This limits the performance impact caused
by multiple clients with high image resolution settings accessing
your appliances interactively.
For example, if you specified an Interactive Mode Limit of
320x240, the maximum resolution mode available in the Camera
View of Advanced View is 320x240.
Field Description