Filter
Top Products
45NetBotz Appliance User’s Guide
Scanners gather the following information about the network interfaces of all configured SNMP targets
in individual sensor sets:
• Admin Status: State sensor that reports the admin status of the interface.
• IF Description: Displays the interface description value (does not support threshold
configuration).
• IF MAC Address: Displays the interface MAC address (does not support threshold
configuration).
• IF Type: State sensor that reports the interface type value.
• Incoming Discards: Analog sensor that reports the number of incoming packets discarded by the
interface.
• Incoming Errors: Analog sensor that reports the number of incoming packets containing errors
received by the interface.
• Incoming Non-Unicast Packets: Analog sensor that reports the number of incoming non-unicast
packets received by the interface.
• Last Change: Analog sensor that reports the last change value for the interface.
• OP Status: Analog sensor that reports the OP status of the interface.
• Outgoing Errors: Analog sensor that reports the number of outgoing packets containing errors
sent by the interface.
• Outgoing Non-Unicast Packets: Analog sensor that reports the number of non-unicast packets
sent by the interface.
• Outgoing Octets: Analog sensor that reports the number of outgoing octets sent by the interface.
• Outgoing Unicast Packets: Analog sensor that reports the number of outgoing unicast packets
sent by the interface.