Filter
Top Products
59NetBotz Appliance User’s Guide
3. Type the appropriate values in the fields.
4. By default, all Periodic Reports are generated according to the Interval you specify. You can
specify that a Periodic Report be active only during specific time ranges. To configure Advanced
Scheduling:
a. Click Advanced Scheduling....
b. By default, all time periods in the schedule are Enabled. To disable the Periodic Report for
a period of time, click-and-drag over the time range, and click Disable. To enable the
Periodic Report for a period of time, click-and-drag over the time range, and click Enable.
c. Click OK to save the schedule and return to the Edit E-mail Periodic Report window.
5. Click OK.
Configuring periodic FTP reports
To configure your appliance to periodically generate and deliver sensor reports to a specified FTP server:
1. Select Periodic FTP Report from the Periodic Reports Configuration window and click Edit.
2. The Edit Periodic FTP Report window opens. This window contains the following fields:
Graph available
history
The maximum time period for which data is graphed.
E-mail addresses The addresses to which periodic e-mail reports are delivered.
Field Description
Enabled Enable periodic FTP reporting.
Include camera
pictures
Include image captures by camera pods connected to the appliance
in the FTP post. Image captures included with periodic reports are
640x480 resolution, regardless of appliance Camera settings.
Include maps Include maps stored on the appliance in the FTP post.
Include graphs Include graphs of the sensor readings for all sensors associated
with the appliance in the FTP post.
Interval The frequency in minutes with which FTP reports are generated.
Sensor priority Limit the amount of sensor data included with the periodic report.
Select one of the following settings:
High: Only sensor data associated with physical sensors that are
integrated with or connected to the appliance are included in the
report. Sensor data associated with shared pods is not included in
the report.
Medium: Sensor data associated with physical sensors and shared
pods is included in the report. Data associated with scanned
devices is not included.
Low: Sensor data from all sensors is included in the report.
Field Description