Filter
Top Products
127NetBotz Appliance User’s Guide
Creating a set beacon output state alert action
To create an Alert Action to use Set Beacon Output State alert notification:
1. Double-click the Alert Actions icon to open the Alert Action window.
2. Click Add to open the Select Notification Method window.
3. Select Set Beacon Output State and click OK.
4. Enter a name for this alert action in Alert action name.
5. Specify Advanced Scheduling (optional). By default, all Alert Actions are active 24 hours a day,
7 days a week. You can specify an Alert Action to be active only when alert conditions occur
during specific time ranges. To configure Advanced Scheduling:
a. Click Advanced Scheduling.... The Advanced Scheduling window opens.
b. By default, all time periods are Enabled. To disable the alert action, click-and-drag to
highlight the time range, and click Disable. To enable a disabled time range, click-and-drag
to highlight the time range, and click Enable.
c. Click OK to save the schedule and return to the Add Alert Action window.
6. Check the alert Severities that apply to buttons to be activated.
7. Select a switch relay device generated by this alert action from Beacon Output Device. All
switch relay devices defined for use with this appliance appear in this selection list.
8. Select the state of the beacon when an alert occurs from Switch Beacon on Alert.
9. In New Beacon State on Return-to-Normal, select the state of the beacon when the violated
threshold returns to a normal state.
10.Click OK to save this Alert Action.